Posts Tagged ‘Nissan’

7 July

Bugatti to release Veyron successor by 2012, considers racing program

Filed under: Supercars, Bugatti

With its quad-turbo W16 pumping out over 1000 horsepower and reaching speeds in excess of 250 mph, surpassing the Bugatti Veyron is no mean feat. Many have tried, but few have succeeded. Yet that is exactly what Bugatti’s own engineers will have to achieve when it comes time to replace the Veyron with its successor.

What form that successor would take has been a subject of great debate and continued speculation. At first it was rumored to go downmarket as a roadster. Then it was expected to be a four-door. A lightweight exotic was said to be under development, while its new corporate overlords at Porsche seemed keen to relegate the marque altogether to coachbuilder status. In an emerging interview for Holland’s AutoTelegraaf, however, CEO Franz-Josef Paefgen revealed that Bugatti is preparing to launch a new model to replace the Veyron in 2011 or 2012, and that despite restricting emissions and fuel economy regulations around the world, the new model would have to stand up to the performance standards set by the Veyron. Design will follow along the same theme as the Veyron, while Bugatti also considers a racing program, although what championship it would contend remains the subject of further speculation.


More

Filed under: Motorsports, Tuners, Nissan

Professional drifting series, Formula D, is trying to quickly win over fans and competitors in order to become one of the top forms of motorsport in the United States. As folks have learned in the markets this past year, though, rapid growth does not come without some giant bumps in the road. It looks like Formula D has now slid into a wall with a few of its teams. Confusion surrounding the series rule book has come to a head in discussions at Drifting.com. The rules state that any change to a vehicle’s OEM suspension design must be approved by Formula D. Of course, a visual inspection of every car lined up for a run at a Formula D event proves that no one is utilizing 100% OEM suspension components. Aftermarket coilovers, adjustable control arms and urethane bushings are all-too-,common modifications seen throughout the pits. Therefore, there must be a list available to competitors outlining the approved components for all competing vehicles. No such list is available, however. That means teams have no method of verifying that other competitors are following the rules, other than the fact an entry passed Formula D’s own tech inspection. Current discussion is making a case for the use of vehicle technical sheets as found in series such as SCCA Speed World Challenge to list all allowable modifications for approved competition vehicles.

One particular team lies behind the call for rule revisions, while other concerned competitors back up their request for clarification. The vocal team is the group behind the Super Autobacs Nissan Skyline, which was recently deemed ineligible for competition by Formula D. The series organizers claim the Skyline features illegal front suspension modifications by using the OEM parts off a Nissan Laurel. However, the RWD Scion tC campaigning in the series is eligible despite also using suspension parts from another Toyota vehicle that shares the same chassis. The rules become particularly unclear when other vehicles are allowed to run with obviously altered suspension setups. 350Zs have altered the mounting points of their rear axles and Chevrolet Corvettes have converted from leaf springs to coilovers. Hopefully, Formula D can learn from this tussle and develop a fair and documented method of approving vehicle,s rather than leaving everyone in the dark. Thanks for the tip MrCoolGuy!


More

22 June

Krumm and Yanagida set the fastest time in Super GT race

Krumm and Yanagida set the fastest time in Super GT race - star.com.my
SEPANG: The partnership of Michael Krumm-Masataka Yanagida brought cheers to the Nissan stable when they emerged fastest in the qualifying session for the Malaysian leg of the Super GT International Series at the Sepang Circuit yesterday….

5 June

Chrysler ties Toyota for most productive plants in North America

The Harbour Report released today reveals that the Big 3 gained major ground in closing the productivity gap with Japanese automakers building vehicles in North America last year. The report found that Chrysler had actually improved enough to tie Toyota as the most productive multi-plant manufacturer on the continent, with both automakers spending an average of 30.37 hours to build a vehicle. The most productive single plant in North America also belongs to Chrysler, as the once experimental Toledo Supplier Park takes just 13.57 labor hours to build a Jeep. For their parts, General Motors plants averaged 32.29 hours per vehicle and Ford plants averaged 33.88 hours per vehicle, both an improvement over last year’s numbers.

The news was not all good, however, as the report found that despite improving their productivity, the Big 3 are still unable to match the Japanese in profit made per vehicle. While Honda and Nissan earned $1,641 per vehicle built in North American last year and Toyota earned $922, Chrysler lost $412 per vehicle and GM and Ford lost $729 and $1,467 per vehicle, respectively. Much of those losses come from high health care costs and profit-shrinking incentives required to move less popular vehicles like trucks and SUVs. The Harbour Report suggests, however, that employee buyouts and those new contracts with the UAW that get them off the hook for retiree health care will improve the Big 3’s profit per vehicle dramatically.

Check out the lengthy press release from the Harbour Report after the jump if you’re into digging through the nitty gritty details.

[Source: The Harbour Report]

Continue reading Chrysler ties Toyota for most productive plants in North America


Just less than a year ago, the Big 3 domestic automakers’ combined market share dropped to less than 50-percent of the overall automobile market. That sobering statistic was made factual when the combined sales of vehicles from both Asian countries, such as Japan and Korea, were combined with sales from European companies, like Volkswagen, BMW and Mercedes-Benz. It seems that this sad state of affairs did little to stop the bleeding coming from Detroit, as last month marks the first time in history that Asian automakers alone, with a combined share of 47.8-percent, sold more vehicles in the United States than companies actually based there. Ouch.

Large pickup trucks and SUV’s have long been the last stronghold for Detroit’s struggling automakers. While the Big 3 still have a commanding lead in sales of these large vehicles, it’s the smaller, more fuel efficient vehicles which are taking the largest bite from the overall market share pie. Record-high fuel prices have put such a damper on truck sales that a shocking five vehicles outsold the F-150 last month, all of them highly practical sedans. It seems easy to see, then, where Detroit should be spending what engineering dollars it has left.

[Source: The Detroit News]


More

13 May

Confirmed: Nissan/Renault developing low-cost Nano-killer with Bajaj

Filed under: Economy, Nissan, Renault, India, TataIt was rumored that Nissan/Renault was serious about fielding a low-priced competitor to the $2,500 USD Tata Nano, and the automaker made it official today by announcing a plan to produce an equally inexpensive car called the ULC in conjunction with Indian automaker Bajaj Auto. The two companies are forming a joint-venture to produce the ULC, which will be built at an all-new facility in Chakan, India at an initial rate of 400,000 units per year. The Tata Nano has no need for concern just yet, as the ULC isn’t scheduled to go on sale until early 2011 in India and then even later in export countries. We’re doubtful that the U.S. is among those export considerations, but parts of Europe will likely see the ULC not long after the Nano arrives in their market. More

Filed under: Sports/GTs, Hatchbacks, Supercars, Alfa RomeoClick above to view the Alfa Romeo brothers in hi-res When I was a little kid I wanted to be like my big brother. I would dress the same as him, go to the same places as him, do the same things as him… It never really worked because, at the end of the day, I never looked anything like him. So while I doubt I was the only one, I had one eyebrow raised when Alfa Romeo set out to mimic the design of its show-stoppin’, range-toppin’ 8C Competizione with a new entry-level model. A mass-market hatchback designed to look like an ultra-exclusive supercar? Well Alfa arguably achieved just that with the new MiTo, and to prove that point it’s graced us with a whole gallery of new images of the two siblings side by side. The kid brother may look that much more junior in juxtaposition, but the resemblance is uncanny. See for yourself in the gallery by clicking the thumbnails below. More